UPDATE November 24: I'm relieved to report that the touchscreen issues described below appears to have been resolved by a firmware update released on Sony's tech support site.
Kudos to TabletPCReview forum poster Miles Wolf, who first spotted the fix.
I installed it yesterday morning from Sony's Japanese tech support site and haven't experienced the problem since. The bios update is now available on Sony's US eSupport site.
* * *
UPDATE: As I feared below, additional testing of the Flip has surfaced a much more serious issue than pen pressure or fan noise. I must recommend that you avoid the device until the issue is corrected. See this post for more information: http://surfaceproartist.com/blog/2013/11/14/the-real-dealbreaker-for-sony-vaio-flip-15a-frequent-loss-of-pen-touch-control
ORIGINAL POST
It's irresponsible to post a hardware review based on a single use case, but a lot of you have been clamoring for my verdict on the Sony VAIO Flip 15A convertible since I unboxed it Sunday.
This post is based on just a few hours' worth of work on the system, so I reserve the right to change my mind. And as I test other applications, my judgement may change.
If you don't use Manga Studio or its Japanese twin Clip Studio Paint, move along there's nothing to see here. I intend to test other apps on the Flip, but it will take a while as I still have a lot of installing and testing to do on the Surface Pro 2. Licenses and activations for most high-end programs being what they are, it's not a trivial matter to try to test on a growing number of devices.
If you are a Manga Studio/Clip Studio Paint user, I think you will be very happy if you decide to go with any of the Flip models. I've been performing all my recent hardware tests with CSP 1.2.7, which is downloadable from the Celsys website. This is virtually identical to MS 5.0.3 and I'm using the former only because of the convenience of downloading the trial onto new hardware.
To sum up my first impressions: the Flip is a beautiful machine. I love the brushed aluminum finish, although it is a fingerprint magnet. I like the thin profile, light weight for a full laptop and solid construction.
The one nitpick I have on construction is a hinged plastic attachment on the Ethernet jack. I'm not sure why Sony engineered the port this way. It seems likely to snap off at some point down the road and isn't flush with the bottom of the case when a cable is attached.
I was surprised that the keyboard is backlit, which is a very useful feature in low light. The keys are very nicely spaced, although their profile is a bit low and too flush with the keyboard for my tastes. The touchpad is very roomy, but like all Windows trackpads I've ever used, it doesn't compare with a MacBook for silkiness or responsiveness. One by-product of the touchpad's size is that I occasionally right clicked when I thought I was left clicking; your thumb really needs to travel some distance to get from one side to the other.
The flipping mechanism is very sturdy but sometimes awkward to use. The laptop is particularly stiff to open. Perhaps this will loosen over time, but it always takes few seconds to figure out where to apply pressure to lift the screen either from a close position or from tablet mode back into laptop mode.
On the other hand, it's very easy to go into presentation mode, which is great for watching videos. I'm sure that will come in very handy on a plane.
The screen orientation sensors don't always work and the screen has gotten stuck upside down or in portrait mode for a while. The behavior is intermittent and never lasted very long, although I can't reliably recall how I corrected it. This sometimes also occurs with the Surface Pro and the resolution usually involves some violent shaking to get the sensors to notice the change of orientation.
The active pen (sold separately on all but the highest end configuration) is surprisingly solid and comparable with the Wacom Stylus Feel. It has two button for those of you who crave that control, but it lacks an eraser tip. The buttons are flush with the pen, so it's too easy to push them accidentally.
I complained yesterday about the fan noise and I hope that Sony addresses fan speed with a future firmware update. I originally tested the Flip on my living room sofa with no other equipment running and the fan noise was almost unbearable. But working in my noisy office environment this morning, the fan was not a dealbreaker. In fact, I don't believe they kicked on at all while running CSP for a couple of hours.
I was about to give the fans a pass until I had to install today's extensive number of Windows updates. The fans kicked into high gear during that process and no amount of noisy office gear could drown out this high pitched whir.
Fortunately it seems that CSP doesn't push the cpu temperatures high enough to trigger the fans, bu you will want to keep your noise canceling earphones handy if you plan to use the Flip for anything cpu intensive (no joke!). And don't be surprised if other members of your household or office colleagues ask you to work outside.
Pens and sensitivy are a highly subjective topic. Your mileage may vary, but in my opinion, the active pen performs very well in Clip Studio Paint. The range of pressure sensitivity is definitely less than on the Surface Pro or my Yiynova MVP22U tablet monitor, but it is still very usable. It takes a bit more pressure for light marks to show up and it requires more control to demonstrate more than a few variations of pressure.
One distracting "feature" when drawing is that I've found small areas on the screen where the pen tip will drag more than in others. This doesn't seem to affect the accuracy of the drawn line, but it is a little jarring to suddenly hit a pocket of resistance. The problem seems to be exacerbated when working at higher magnifications. Any N-Trig users see similar behavior in other devices?
Another interesting difference that I noticed between my other devices and the Flip is that pen stabilization seems to work differently. I regularly crank it up to 90 on the Surface Pro to smooth out my shaky lines. Turning up the stabilization that high on the Flip makes it impossible to draw reliably. Turning the stabilization down to the defaults of 10 or 15 delivers the desired smooth results.
Calibration out of the box was very good except that I can't trigger the desktop taskbar to unhide with the pen. The cursor rides several pixels above the very bottom of the screen, so unhiding the taskbar requires a finger. I tried a couple of times to compensate with the calibration tool, but that impacted the cursor's accuracy elsewhere on the screen so I reverted to the defaults.
